All Products

The 3.5 Watt 6 Volt solar panel is lightweight, waterproof, and designed for long term outdoor use. When installed in full or even partial sun, it will fully charge and maintain the internal battery of the Sap Spy Sensor Hub. 

SapSpy Sensor Hub battery typically lasts 2-4 weeks between charges. The optional solar panel add-in can charge a battery from empty to full in 8-12 hours of full sun. This keeps the Sensor Hub powered all season without any additional intervention even during multiple days of heavy cloud cover. 

Solar Panel includes mounting bracket and necessary cables to plug directly into the SapSpy Sensor Hub. 

The power chord with alligator clips is an alternative option to power the SapSpy Sensor Hub from any 6 or 12 bolt battery. This option will keep the Sensor Hub easily powered all season without any additional intervention.

Customer supplies external 6 or 12 volt battery. 

Do not connect the SapSpy Sensor Hub to a battery within a running vehicle. The higher voltage introduced by a running vehicle may cause damage. Typically, the battery is fully disconnected and brought into the Sugarbush. 

Note: This option is not required for remote sugarbushes. The SapSpy Sensor hub includes an internal rechargeable battery. This battery will last 2-4 weeks between charges already. The purpose of this option is to allow you to remotely recharge the internal battery or for full season SapSpy use without having to recharge. 

This is a spare USB cable used to plug in the sensor hub for recharging its internal battery or when constant power is available. A specific connector is used in our sensor hubs allowing the cable to be properly secured and weather tight. This cable is included with any new sensor hub. It’s available here for purchase if the original cable was misplaced.

This does not include the USB wall adapter. Any standard USB wall adapter will work. 

This 15’ extension cable can be used with the ultrasonic tank level sensor or relay model to add an additional 15’ length. Cable plugs in and screws together for a secure weatherproof seal. Adding this will allow a total of 25’ between tank level sensor and Sensor Hub or 20’ between the relay module and sensor hub. 

This is stainless steel probe can be used with most liquid level float relays to turn a pump on/off. This is the same probe used in our electronic protection valve. Price is per probe. 

As of 2/19/2025 - we are out of stock. We expect to be back in stock by 2/28/2025 with near immediate shipment of new orders. 

This is a RP-SMA style antenna used on Sensor Nodes and Sensor Hubs. 

Due to the approaching 2025 maple syrup season, this item is available to existing Sap Spy customers only. You can use the chat, contact us or email us at info@sapspy.com to place a custom order for this item. 

With Sap Spy, you can now start or stop your Westinghouse generator remotely using your mobile phone over the cellular network. No more wasting time and energy running back and forth to control your pumps—do it all with a tap on your screen! Whether you're managing pumps or emptying a remote tank, Sap Spy makes it easy and efficient.

Compatible Westinghouse Generators (ST Switch Ready) include: WGen5300 WGen5300DF WGen7500 WGen7500DF WGen9500 WGen9500DF WGen12000 WGen12000DF

This is a cable that interfaces a Sap Spy control relay to a Westinghouse generator that is ST Switch Ready. This is used to remotely start and stop your Westinghouse style generator remotely through Sap Spy. 

This GPI Water Meter Upgrade Kit enables you to add pulse output capability to your current water meter. This pulse output cable enables monitoring by Sap Spy, providing real-time data on total gallons per reading, gallons per hour, gallons per day, gallons/tap per day, and total gallons/tap for the season.

This magnetic reed switch is designed to work seamlessly with the Sap Spy pulse counting sensor node. It is frequently utilized in the sugarbush to keep track of dump cycles on a mechanical releaser. In the Sap Spy app, you can input the amount of gallons per dump cycle (pulse) to easily monitor your overall gallons per hour and day, as well as estimate your total gallons for the season. This is an option for those using a mechanical releaser in the sugarbush.

The magnetic switch will create a pulse anytime the magnet is within 1/2" from the magnetic reed switch. This can be commonly retrofitted to many mechanical releasers such as the float or other components that travel during the dump cycle. 

This is the yearly subscription fee for each Sap Spy Sensor Hub. By default all Sensor Hubs will be deactivated between Early May --> Early January during off season. Devices will reactivate automatically Early January 1st --> Early May. SapSpy can accommodate year long activation by request for no additional charge.

First sugaring season is included in the purchase!