Accessories

This is the yearly subscription fee for each Sap Spy Sensor Hub. By default all Sensor Hubs will be deactivated between Early May --> Early January during off season. Devices will reactivate automatically Early January 1st --> Early May. SapSpy can accommodate year long activation by request for no additional charge.

First sugaring season is included in the purchase! 

The 3.5 Watt 6 Volt solar panel is lightweight, waterproof, and designed for long term outdoor use. When installed in full or even partial sun, it will fully charge and maintain the internal battery of the Sap Spy Sensor Hub. 

SapSpy Sensor Hub battery typically lasts 2-4 weeks between charges. The optional solar panel add-in can charge a battery from empty to full in 8-12 hours of full sun. This keeps the Sensor Hub powered all season without any additional intervention even during multiple days of heavy cloud cover. 

Solar Panel includes mounting bracket and necessary cables to plug directly into the SapSpy Sensor Hub. 

This 15’ extension cable can be used with the ultrasonic tank level sensor or relay model to add an additional 15’ length. Cable plugs in and screws together for a secure weatherproof seal. Adding this will allow a total of 25’ between tank level sensor and Sensor Hub or 20’ between the relay module and sensor hub. 

The power chord with alligator clips is an alternative option to power the SapSpy Sensor Hub from any 6 or 12 bolt battery. This option will keep the Sensor Hub easily powered all season without any additional intervention.

Customer supplies external 6 or 12 volt battery. 

Do not connect the SapSpy Sensor Hub to a battery within a running vehicle. The higher voltage introduced by a running vehicle may cause damage. Typically, the battery is fully disconnected and brought into the Sugarbush. 

Note: This option is not required for remote sugarbushes. The SapSpy Sensor hub includes an internal rechargeable battery. This battery will last 2-4 weeks between charges already. The purpose of this option is to allow you to remotely recharge the internal battery or for full season SapSpy use without having to recharge. 

This is a RP-SMA style antenna used on Sensor Nodes and Sensor Hubs. 

This is an additional tank level sensor compatible with Sensor Hubs, Sensor Nodes and LED the sight glass. By default, each of these devices already comes with a tank level sensor. This item can be used to upgrade to an alternative style or as an add-on if you originally purchased without the tank level sensor. 

Measure: Tank Level (0-100%) Vacuum Level (0-29.9 inHg) Temperature (degrees F)

We generally recommend the submersible style level sensor in all scenarios. The only disadvantage to the submersible is it is one more think to wipe down/clean when you clean your sap tanks. 

The submersible sensor cable length is 15' and includes an extra 15' extension: 30' total. 

The ultrasonic sensor cable length is 15' total and by default does not include an extension. 

The only scenario you'd want to use the ultrasonic sensor is for open top tanks using an electric releaser. 

This is stainless steel probe can be used with most liquid level float relays to turn a pump on/off. This is the same probe used in our electronic protection valve. Price is per probe. 

As of 2/19/2025 - we are out of stock. We expect to be back in stock by 2/28/2025 with near immediate shipment of new orders. 

This is a spare USB cable used to plug in the sensor hub for recharging its internal battery or when constant power is available. A specific connector is used in our sensor hubs allowing the cable to be properly secured and weather tight. This cable is included with any new sensor hub. It’s available here for purchase if the original cable was misplaced.

This does not include the USB wall adapter. Any standard USB wall adapter will work. 

This two-toned cap features breathable mesh with contrast stitching. Front side is black with Sap Spy embroidered into it and the back side is a breathable white mesh. Featuring Mesh Flex Fit.

• 55% polyester, 43% cotton, 2% spandex
• 6-panel structured, low-profile hat
• Sewn eyelets
• Size 6 7/8 – 7 1/2 (L/XL)

Care instructions: Spot-clean only. To preserve the cap shape and your design, we don’t recommend machine washing.

This magnetic reed switch is designed to work seamlessly with the Sap Spy pulse counting sensor node. It is frequently utilized in the sugarbush to keep track of dump cycles on a mechanical releaser. In the Sap Spy app, you can input the amount of gallons per dump cycle (pulse) to easily monitor your overall gallons per hour and day, as well as estimate your total gallons for the season. This is an option for those using a mechanical releaser in the sugarbush.

The magnetic switch will create a pulse anytime the magnet is within 1/2" from the magnetic reed switch. This can be commonly retrofitted to many mechanical releasers such as the float or other components that travel during the dump cycle. 

Keep the cold at bay with the Sap Spy Fleece-Lined Knit Cap.

• 100% acrylic, 100% polyester fleece (lining)
• One size fits all
• Hand wash & lay flat to dry

This GPI Water Meter Upgrade Kit enables you to add pulse output capability to your current water meter. This pulse output cable enables monitoring by Sap Spy, providing real-time data on total gallons per reading, gallons per hour, gallons per day, gallons/tap per day, and total gallons/tap for the season.

This is a 5/16 quick connect set including: 

• 5/16" barb to Large Bore Male Luer Fitting
• 5/16" barb to Large Bore Female Luer Fitting
  

This set is commonly used to quickly connect/disconnect a vacuum line from a Sap Spy sensor node or hub. Hubs are included with this fitting. They are available to use with nodes as well. 

You can either use this fitting or another common approach is to use a 5/16" straight line connector and simply replace the straight connector each season. 

• Stainless steel (contoured base), clear ABS plastic Snap-On
• 7.68" H x 3.39" D
• 22 oz.
• Vacuum-insulated: Keeps drinks hot or cold for up to 6 hours
• Spill-resistant sip-top lid
• Hand wash only